Is the Seagate IronWolf 110 compatible with Synology NAS?

Yes. 10 Seagate IronWolf 110 part numbers are on Synology's official compatibility list, spanning 0.2TB to 3.8TB, and are listed for 71 Synology models.

What capacities does the Seagate IronWolf 110 come in on the Synology list?

Listed capacities: 1.92TB, 240GB, 3.84TB, 480GB, 960GB.

Seagate IronWolf 110 on the Synology compatibility list

NAS 0.2–3.8 TB

10 Seagate IronWolf 110 part numbers appear on Synology's official HCL, officially supported across 71 NAS models. Every capacity below is vendor-confirmed — pick a part number, then check it against your machine.

Listed part numbers

Compatible Synology models

0.2–3.8 TB

Capacity range

Listed capacities

All Seagate IronWolf 110 drives on the list

Ranked by how many Synology machines list each part number. Click through for exact model-by-model support.

Part number	Capacity	Listed on	Check per model
ZA480NM10011	480GB	71 machines	See compatible models →
ZA480NM10001	480GB	71 machines	See compatible models →
ZA240NM10001	240GB	70 machines	See compatible models →
ZA240NM10011	240GB	70 machines	See compatible models →
ZA1920NM10011	1.92TB	66 machines	See compatible models →
ZA960NM10001	960GB	66 machines	See compatible models →
ZA960NM10011	960GB	66 machines	See compatible models →
ZA3840NM10011	3.84TB	66 machines	See compatible models →
ZA1920NM10001	1.92TB	66 machines	See compatible models →
ZA3840NM10001	3.84TB	66 machines	See compatible models →

Buying tip

Synology lists 10 Seagate IronWolf 110 variants, but the high-capacity part numbers (above 12TB) tend to appear only on newer models. If you run an older or 2-bay machine, confirm your exact model on the drive page before ordering — a same-series part number is not always interchangeable.

Synology models that list Seagate IronWolf 110 drives