Is the Seagate IronWolf 110 compatible with Synology, QNAP, Asustor, TerraMaster and UGREEN NAS?

Yes. 10 Seagate IronWolf 110 part numbers are on Synology's and QNAP's official compatibility lists, spanning 0.2TB to 3.8TB, and are listed for 85 NAS models.

What capacities does the Seagate IronWolf 110 come in?

Listed capacities: 1.92TB, 240GB, 3.84TB, 480GB, 960GB.

Seagate IronWolf 110 on the Synology, QNAP, Asustor & TerraMaster compatibility lists

NAS 0.2–3.8 TB

10 Seagate IronWolf 110 part numbers appear on Synology's and QNAP's official HCLs, officially supported across 85 NAS models. Every capacity below is vendor-confirmed — pick a part number, then check it against your machine.

Listed part numbers

Compatible NAS models

0.2–3.8 TB

Capacity range

Listed capacities

All Seagate IronWolf 110 drives on the list

Ranked by how many Synology, QNAP, Asustor, TerraMaster and UGREEN machines/series list each part number. Click through for exact model-by-model support.

Part number	Capacity	Listed on	Check per model
ZA480NM10001	480GB	85 machines	See compatible models →
ZA240NM10001	240GB	84 machines	See compatible models →
ZA960NM10001	960GB	80 machines	See compatible models →
ZA1920NM10001	1.92TB	80 machines	See compatible models →
ZA3840NM10001	3.84TB	80 machines	See compatible models →
ZA480NM10011	480GB	71 machines	See compatible models →
ZA240NM10011	240GB	70 machines	See compatible models →
ZA1920NM10011	1.92TB	66 machines	See compatible models →
ZA960NM10011	960GB	66 machines	See compatible models →
ZA3840NM10011	3.84TB	66 machines	See compatible models →

Buying tip

Synology, QNAP, Asustor, TerraMaster and UGREEN list 10 Seagate IronWolf 110 variants, but the high-capacity part numbers (above 12TB) tend to appear only on newer models. If you run an older or 2-bay machine, confirm your exact model on the drive page before ordering — a same-series part number is not always interchangeable.

NAS models that list Seagate IronWolf 110 drives